FacebookYouTubeFlickrTwitter

It is currently 20 Nov 2017 00:10



4x100 to 5x114

What does PCD stand for? Which wheels fit what? Why you'd need spacers & how they alter your offset (ET).

Moderator: WW Moderating Team

4x100 to 5x114

Postby mkay2 » 06 Mar 2015 12:41

Just would like to know how to do this can adaptors be made to go from 4x100 to 5x114
must the hubs be drilled to 5x100 and then make a set of adaptors for 5x114
or do i make two set of adaptors one adaptor 5x100 and another from 5x100 to 5x114
please guys need help!
mkay2
 
Posts: 6
Joined: 06 Mar 2015 07:50

Re: 4x100 to 5x114

Postby marktwovr6 » 05 Aug 2015 07:03

You can get 4x100 to 5x114.3 adapters mate. Granted it's easier to go from 5x100.

Minimum thickness you'll be able to go for would probably be about 20mm as they have to use a concentric (correct word I think) bolt as there is overlap of one bolt.

Either that or find some 5x112 type and use some wobble bolts. Not ideal though.

Make sure you check centre bore sizes too.
marktwovr6
 
Posts: 2
Joined: 13 Feb 2008 09:36

Re: 4x100 to 5x114

Postby vosn » 16 Nov 2015 17:00

vosn
Banded Steel
 
Posts: 176
Joined: 17 May 2008 10:18


Return to ADAPTERS, SPACERS, OFFSETS & PCDs

Who is online

Users browsing this forum: No registered users and 1 guest